CattaValve-F Fixed Valve
CattaValve tray technology combines the attributes of sieve holes and float valves offering low pressure drop while increasing capacity and efficiency. The rectangular valves are extruded from the tray deck
CattaValve tray technology combines the attributes of sieve holes and float valves offering low pressure drop while increasing capacity and efficiency. The rectangular valves are extruded from the tray deck
Features:- · No moving parts · High resistance to fouling · MFV (Mini Fixed Valve) available for higher capacity Fixed Valves are a lower cost alternative used where turndown range
Z-Mister™ mist eliminators are high-capacity separators constructed as banks of parallel, chevron profiles that cause the gas to change direction several times. The momentum forces entrained liquid droplets to impinge
Our DMister™ mist eliminators have an excellent track record as a low cost, highly versatile and efficient method of removing liquid entrainment from gas streams. They can be used for
The Rosenberg RGFC cartridge is a good choice for removing contaminants found in natural gas streams. The synthetic construction allows for an environmentally friendly product and an excellent upgrade option
The DEPSEP™ Plate Pack Coalescer has a combination of inclined parallel plates with a fixed spacing, thus reducing the droplet settling distance and enhancing the coalescence process of oil and
The GasuMax™ Cyclone tubes consist of a fixed swirl device based on state of the art aeronautical design which applies centrifugal force on mist laden vapour to separate entrained liquid
The RosePak™ 125.F, 125.S, 250.F and 250.S and RosePak-Max™ 255.F are also available in different kinds of plastics. The plastic versions of RosePak-Max™ can be used in various types of
RosePak™ is our most widely used structured packing. It has proven to give excellent performance in all column sizes up to 10m. It is supplied in sheet metal thicknesses from
This bed limiter is normally recommended for metal and plastic random packings. It is designed to withstand an upward thrust. The opening size can be varied to suit various packing
The model 1FC08 pipe arm Vapor Distributor is used when a Vapor Feed requires uniform distribution over the tower area to ensure a uniform mix with the existing column vapor
H-Pak™ random packing (Hy-Pak® equivalent ) is an excellent substitute for traditional Pall Rings and is considered to be one of the most efficient ring-type random packings. At almost the
Pall ring random packing is still widely used today. It is specified in a number of licensed processes and has been tested by various researchers over the years. P-Pak™ random
This valve offer high capacity and efficiency combined with a wide operating range. Because of the way the legs are inserted into the deck, the valves cannot spin. The valve
This is the standard, round, full-size, one-piece valve that has been used successfully in columns around the world for over 60 years. It is provided in leg lengths from 6mm
Type RMC Cage is the caged equivalent to the Type RMV valve. It has a moving cap with no moving and a cage assembly retains the cap. Cage type is
The Flash Feed Chamber is a two phase feed device used in small columns, typically 1200 mm (48 inches) ID. The feed enters through a radial inlet and is centrifuged
Rosenberg recommends using the calming baffle model 8CB01 in all liquid/liquid and gas/liquid/liquid separators, either operated as simple gravity settler or equipped with Rosenberg DEPSEP or RoseFlow Coalescer. Baffle plates
Our Catalyst Outlet Support Screen ensures even flow distribution in the bottom bed to maximize catalyst utilization and prevents bed migration to downstream piping and equipment.
C-Pak™ random packing utilizes an aspect ratio of 1:3 (height of the cylinder is 1/3 of the diameter). As a result, the packing elements preferentially orient themselves with the cylindrical
R-Pak™ Random Packing are generic random packing available in metallic, ceramic, graphite and carbon material. It is supplied in many sizes ranging from 5mm to 100mm (1/4” – 4”). R-Pak™
The Trough Style Distributor consists of long tunnels called troughs, and one or more parting boxes, for feeding liquid to the troughs. The parting box helps in controlling the feed
Model GISP is a gas injection type support plate or Random packing support grid is designed for random packed beds in towers generally greater than 900 mm (36 inches) diameter.
The R-VID™ is a proprietary Rosenberg vane type inlet device that is used to introduce gas/liquid mixtures into a vessel or column. The purpose of an R-VID™ is to decrease
The enhanced geometry of the third-generation type packings exhibits more specific area in a more accessible way and so provides higher efficiency for mass-transfer applications and higher capacity than previous
We create added value by appreciating the needs of our customers – with competitive and innovative solutions. The needs of our employees – by adhering to our company values. The needs of our shareholders – with above-average returns. And the needs of our environment – by acting sustainably.
Copyright © Rosenberg 2023. All Rights Reserved.