RosePak-Max™ Structured Packing

At the lower and upper end of each packing element, the orientation of the corrugation gradually approaches the vertical axis. As a result this gives smoother vapor flow and a lower pressure drop.

Due to the geometrical design a reduction in pressure drop and the shear forces, which are especially critical at the inter-face due to the presence of thicker and less stable liquid films. Flooding at the interface is no longer of concern. In the interior part of the packing element the geometrical features of RosePak-Max™ and RosePak™ are identical. The separation efficiency is very similar – albeit with a increase in capacity and a reduction in pressure drop

⊕  RosePak-Max™ for new columns leads to a smaller column diameter
⊕  RosePak-Max™ for existing columns results in a higher capacity at the same efficiency
⊕  RosePak-Max™ has up to 40% higher capacity at the same number of theoretical stages per meter compared to conventional RosePak™

⊕  Vacuum and atmospheric columns
⊕  Natural gas drying
⊕  CO2 and H2S Absorbers and strippers
⊕  C3- and C4- splitters
⊕  Xylene splitters